Pro Appli Care: Washing Machine & Dryer Repair in Faiha, Capital Governorate, Kuwait

Laundry on hold? Pro Appli Care gets your washer or dryer running like new—fast. We specialize in accurate diagnosis, quality repairs, and preventive maintenance for all major brands and models. Whether it’s a front‑load washer that won’t drain or a dryer that won’t heat, our technicians bring the right tools, parts, and know‑how to finish the job properly the first time.

• Location: Ground Floor, Faiha Co‑operative Society (Block 9), Street 95, Block 9, Faiha, Capital Governorate, Kuwait
• Service focus: Washing machine repair, dryer repair, washer‑dryer combo repair, installation and setup
• Scheduling: Same‑day/next‑day visits in Faiha (subject to availability)

   

Pro Appli Care in Faiha — Your Local Laundry Appliance Experts

Faiha homes face tough conditions: heat, dust, and heavy laundry cycles. Pro Appli Care is built for Kuwait’s climate. We deep‑clean blockage‑prone parts, check heating elements and sensors, and level machines to reduce vibration and noise. Expect honest advice, tidy work, and a clear invoice every time. Highlights:

• Fast response across Faiha and nearby Capital Governorate areas
• Genuine or high‑quality compatible parts
• Transparent, written quotes before work begins
• Parts and labor warranty on eligible repairs

Pro Appli Care Services — What We Repair and Install

Washing machines

• Front‑load, top‑load, semi‑automatic
• Not draining, not spinning, won’t start, error codes, leaks, shaking, bad odors
• Drive belt, motor, carbon brushes, door lock, pump, inlet valve, heating element, sensors, PCB control board

Dryers

• Vented, condenser, heat‑pump
• Not heating, takes too long, drum not turning, squeaking, burning smell
• Heating element, thermal fuse, thermostat, NTC sensor, drum belt, idler pulley, rollers, motor, PCB/control

Washer–dryer combo units

• Water not switching to dry, drying performance poor, steam issues
• Dual‑function diagnostics, element and sensor checks, vent/condensation pathway cleaning

Installations and relocations

• Unboxing, placement, leveling, inlet and drain hose setup
• Dryer venting or condenser/heat‑pump setup
• Test cycles and user tips for optimal performance

Pro Appli Care Diagnostic Approach — Fix It Right the First Time

• Listen and inspect: We note symptoms, error codes, and recent changes (new detergent, new location, power issues).
• Functional tests: Power and PCB, water intake and pressure, drainage and pump, drum drive and spin balance, heating systems, sensors.
• Mechanical checks: Belt, bearings, shocks, springs, seals, door lock and hinges, hose and gasket integrity.
• Water and airflow: Filters, lint traps, vents and ducts (for dryers), condensate paths (for combos).
• Final validation: Full test cycle where possible, with temperature, spin speed, and moisture checks.

You receive a clear explanation, the parts required (if any), and the total price before work starts.

Pro Appli Care Pricing & Warranty — Fair, Transparent, Predictable

What influences price

• Appliance type and model complexity
• Fault type (electrical, mechanical, water, heating)
• Part availability and brand‑specific components
• Access (stacked units, tight cabinetry)

What you can expect

• Competitive diagnostic fee (often credited if you approve the repair)
• Written, itemized quotes—no hidden charges
• Warranty on parts and labor; coverage explained on your invoice

Tip: Share your model number and a short video of the issue for a faster, more accurate estimate.

Pro Appli Care Brand Coverage — Most Major Makes and Models

We service Samsung, LG, Whirlpool, Bosch, Siemens, Electrolux, Beko, Hoover, Midea, Haier, Panasonic, Indesit, Candy, AEG, Maytag, Daewoo, and more. Note: If your appliance is still under manufacturer warranty, contact the brand’s authorized service first. If not, Pro Appli Care is ready to help.

Pro Appli Care Troubleshooting Guide — Common Problems and Causes

Washer issues we see often

• Won’t start: Door lock failure, PCB fault, blown fuse, wiring issue, power inlet failure
• Not draining: Clogged pump filter, blocked hose, failed drain pump, foreign objects
• Not spinning or weak spin: Worn belt, motor brushes, tachometer sensor, unbalanced loads
• Leaks: Door gasket wear, loose hoses, dispenser overflow, tub seal issues
• Excess vibration/noise: Unleveled machine, damaged shocks or bearings, shipping bolts left in place
• Bad odors/mold: Detergent residue, standing water, unventilated door seal

Dryer issues we fix fast

• No heat/low heat: Burnt heating element, tripped thermal fuse, faulty thermostat or NTC sensor
• Takes too long to dry: Clogged lint filter, blocked vent/duct, weak airflow, moisture sensor fault
• Drum not turning: Broken belt, seized rollers, faulty idler pulley or motor
• Squeaks/scrapes: Worn rollers, misaligned drum, debris near felt seals
• Stops mid‑cycle: Overheating, faulty door switch, control board malfunction

Combo‑unit specifics

• Wash is fine but dry is weak: Clogged condenser pathway, heater fault, fan or sensor issues
• Error codes during dry cycle: Temperature sensors, moisture sensors, PCB control logic

Pro Appli Care Safety First — Quick Checks You Can Try

Do this safely

• Power test: Plug a small lamp into the same outlet to confirm power
• Reset: Unplug for 2–3 minutes and plug back in
• Washer filter: Clean the drain/pump filter (have a towel/tray ready)
• Dryer airflow: Clean lint filter; ensure vent hose isn’t crushed
• Leveling: Adjust feet so the appliance doesn’t rock

Avoid doing this yourself

• Opening machine panels
• Bypassing door locks or thermal fuses
• Handling wiring, heaters, or control boards

If you smell burning, see sparks, or notice tripping breakers, unplug immediately and call Pro Appli Care.

Pro Appli Care Preventive Care — Maintenance for Kuwait’s Climate

• Monthly: Clean washer door seal and detergent drawer; run a hot maintenance cycle; clean dryer lint filter every load
• Every 3–6 months: Rinse dryer ducts/condensers (per model); inspect washer hoses for bulges or cracks
• Every 6–12 months: Professional deep clean—pump, drain, and internal pathways; safety inspection for heaters, sensors, and seals
• Daily habits: Don’t overload; dose detergent correctly; leave the washer door ajar after cycles to reduce mold

These small habits prevent breakdowns, reduce odors, and keep energy use low.

Pro Appli Care Local Advantage — Near You in Faiha

Find us easily:

• Ground Floor, Faiha Co‑operative Society (Block 9), Street 95, Block 9, Faiha, Capital Governorate, Kuwait

What to expect when you visit

• Quick booking and scheduling help
• Guidance on safe machine use and error code meaning
• Clear time windows for technician arrival

Nearby service areas

• Faiha (primary), Kaifan, Shamiya, Shuwaikh Residential, Qadsiya, Nuzha, Khaldiya, Dasma, and adjacent Capital Governorate neighborhoods

Pro Appli Care Advantages — Why Households Choose Us

• Local experts: Fast response and deep familiarity with common Kuwait‑specific faults
• Accurate diagnostics: We fix root causes, not just symptoms
• Quality parts: Genuine or high‑grade compatible components matched to your model
• Respectful service: Shoe covers, clean workspace, clear communication
• Warranty & support: We stand behind our work and offer practical after‑care tips

Pro Appli Care Step‑by‑Step — From Booking to Fix

1. Book

• Share brand and model number, symptoms, and your preferred time. A short video helps.

2. Diagnose

• On‑site tests for power, water flow, drainage, drum drive, heating, sensors, and control logic.

3. Quote

• You receive an itemized estimate with parts, labor, and timeline. No surprises.

4. Repair

• Faulty components replaced or repaired; hoses and seals checked; alignment and leveling adjusted.

5. Test

• We run functional cycles (wash/spin or timed/auto dry), check for leaks, noise, and correct temperatures.

6. Handover

• We tidy up, explain what we did, share maintenance advice, and provide warranty details.

Pro Appli Care FAQs — Answers to Common Questions

• Do you fix combo washer–dryers? Yes. We diagnose both wash and dry functions, from pump and valve issues to heater and sensor faults.
• How fast can you come to Faiha? Often same day or next day, depending on schedule and part availability.
• Can you source parts for older models? Where available, yes. Share the model number and we’ll confirm options and timelines.
• Is repair or replacement better? We’ll compare repair cost vs. age and condition. If replacement makes more sense, we’ll tell you upfront.
• Do you install new machines? Yes—unboxing, placement, leveling, hose/vent setup, and full test cycles.
• Do you offer a warranty? Yes. Parts and labor are covered on eligible repairs; terms are shown on your quote/invoice.

Pro Appli Care Content Tips — For Better SEO on Your Page

• Use your brand and location in headings: “Pro Appli Care in Faiha”
• Add internal links: Home, Contact, About, Services, and Service Areas
• Include photos with alt text: “washing machine repair in Faiha Kuwait”
• Embed a Google Map of Faiha Co‑operative Society (Block 9) for local relevance
• Add opening hours and a WhatsApp click‑to‑chat to boost conversions

Book Pro Appli Care — Get a Fast, Clear Quote Today

Visit us:

• Ground Floor, Faiha Co‑operative Society (Block 9), Street 95, Block 9, Faiha, Capital Governorate, Kuwait

To speed up your quote, share:

• Brand and model number
• What’s happening (won’t start, won’t drain, no heat, error code)
• Your neighborhood and preferred date/time

We’ll schedule the earliest available visit, confirm transparent pricing, and get your laundry routine back on track—quickly and professionally.